 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com EL32D1 Series * RoHS Compliant (Pb-Free) * LVDS Output Oscillators * 3.3V supply voltage * Ceramic 6-pad SMD Package * Stability to 25ppm * Tri-State Output * Complementary Output * Available on Tape and Reel ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Differential Output Voltage (VOD) Input Current Frequency Tolerance / Stability EL32D1 H L W 2.0 7.0 5.0 OSCILLATOR Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) VDD Magnitude Change (DVOD) Offset Voltage (VOS) Rise Time / Fall Time Duty Cycle Offset Voltage Magnitude Change (DVOS) Load Drive Capability Control Voltage (VC) Control Voltage Range (VCR) Frequency Deviation Linearity Transfer Function Modulation Bandwidth (MBW) Input Impedance (ZI) Typical Phase Noise (Fo = 155.520MHz) Logic Control/Additional Output Tri-State Input Voltage RMS Phase Jitter Accumulated Period Jitter (tacc) Period Jitter (trj) Period Jitter (trms) Period Jitter (tdj) Period Jitter (tp-p) Start Up Time MANUFACTURER CATEGORY 61.440MHz, 76.800MHz, 80.000MHz, 125.000MHz, 128.000MHz, 155.520MHz, 156.250MHz, 161.1328MHz, 167.3315MHz 0C to 70C -40C to 85C -55C to 125C 3.3VDC 5% 247mV Minimum, 355mV Typical, 454mV Maximum 80mA Maximum Inclusive of all conditions: Calibration Tolerance at 25C, 50ppm or 25ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging, Shock, and Vibration 1.43VDC Typical, 1.6VDC Maximum 1.1VDC Typical, 0.9VDC Minimum -50mV Minimum, +50mV Maximum 1.125V Minimum, 1.20V Typical, 1.375V Maximum 20% to 80% of waveform 1 nSeconds Maximum at 50% of waveform 50 10(%) 50 5(%) 25mV Maximum Between Output and Complementary Output 100 Ohms and 10pF Test Conditions for Frequency Deviation 1.65VDC 1.65VDC 0.0VDC to VCC +0.5VDC Inclusive of Operating Temperature Range, Supply 75ppm Minimum Voltage Change, and Output Load Change 20%, 15%, or 10% Maximum Positive Transfer Characteristic Measured at -3dB with Contol Voltage of +1.65VDC 10kHz Minimum 50kOhms Typical at 10Hz Offset -55dBc/Hz at 100Hz Offset -90dBc/Hz at 1kHz Offset -120dBc/Hz at 10kHz Offset -140dBc/Hz at 100kHz Offset -145dBc/Hz at 1MHz Offset -148dBc/Hz Tri-State Enable High / Complementary Output VIH of 70% of VCC Minimum Enables Output No Connection Enables Output VIL of 30% of VCC Maximum Disables Outputs: High Impedance FJ = 12kHz to 20MHz 0.4pSec Typical, 1 pSec Maximum Sigma of Total Jitter Distribution 4pSec Typical, 5pSec Maximum Sigma of Random Jitter 3pSec Typical, 5pSec Maximum Sigma of Total Jitter Distribution 3pSec Typical, 5pSec Maximum Deterministic Jitter 4pSec Typical, 10pSec Maximum Peak to Peak of Jitter Distribution 27pSec Typical, 40pSec Maximum 10mSec Maximum SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EL32D1 CERAMIC 3.3V OS3Z 10/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. www..com PART NUMBERING GUIDE EL32D1 E E A 2 K - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=50ppm Maximum over 0C to +70C E=25ppm Maximum over 0C to +70C H=50ppm Maximum over -40C to +85C FREQUENCY DEVIATION E=75ppm Minimum LINEARITY A=20% Maximum B=15% Maximum C=10% Maximum AVAILABLE OPTIONS Blank=Bulk TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL / ADDITIONAL OUTPUT K=Tri-State (Enable High) / Complementary Output DUTY CYCLE 1=50% 10% 2=50% 5% MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS Pin 1: Voltage Control Pin 2: Tri-State Pin 3: Case Ground Pin 4: Output Pin 5: Complementary Output Pin 6: Supply Voltage Tolerances= +0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A 16.3-.1 B 7.5.1 C 6.75.1 D 4 .1 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1,000 F 8.1 G B0* H 1.5 +.1-0 J A0* K .3 .05 L K0* R 2.5 MIN S 10 MIN T 22.4 MAX U 360 MAX V 16.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EL32D1 CERAMIC 3.3V OS3Z 10/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EL32D1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |